Z Purlin Roll Forming Machine

Overview of Z Purlin Roll Forming Machine

Z purlin roll forming machine, also known as galvanized steel Z shape purlin roll former, ‌is used for the production of Z type steel. ‌The Z shape purlin steel has a good property of bending resistance, good straightness and also it can be punched and cut online. 

 

Z Purlin Machine Flowchart

Uncoiler  Pre-Shearer  Flattening & Guiding Main Roll Forming Machine  Inkjet Printer Hydraulic Punching Post-Cutter Runout Table  

Components of Z Purlin Roll Forming Machine

Hydraulic Uncoiler

1) Expanding type: Hydraulic expanding

2) Decoil type: Motorized active decoil

Flattening & Guiding System

1) Flattening system: Top 3 and bottom 4 solid shaft, plus extra 4 pinch shafts.

2) Guiding system: Including guiding shaft and guiding rollers, its width is adjustable in order to suit for various steel strips.

3) Shaft material: CNC machining, quenching with tempering heat treatment, finish turning, polishing and chromeplate.

Main Roll Forming Machine

1) Roll stand: 21 main stations 

2) Transmission type: Chain + gear/ sprocket

3) Machine base: Welded by H500 plate, with shot blasting and heat treatment

4) Roller material : GCR15, CNC machining with heat treatment, finish turning, polishing and chromeplate. HRC 58-60

5) Main shaft: SAE 5140, CNC machining, quenching with tempering heat treatment, finish turning, polishing and chromeplate.

6) Main motor: servo main motor.

7) Size change: fully automatic by PLC

8) Purlin Straightening Unit:10 rollers special two axial straightening units plus 4 rollers axial straightening units to ensure purlin will not curve, bow, sweep or twist.

Hydraulic Punching

1) Type : Adopt post-punch, automatic punch to set parameters.

2) Punching cylinder: 3 sets

3) Punching die : According to customer’s requirements.

Post-Cutter

1) Type: Adopt post cut, automatic cut to length, quantity, etc.

2) Cutter material: SAE-AISI D3, quenching.

Power Supply & Control System

1) Control cabinet: 1 set. With ‘emergency stop’ switch.

2) Control handle: 1 set, for jog control during machine testing and production.

3) Operation platform: HMI & Button, with English language display.

Output Table

1) Type : Two sets, 3 meters each, free roller type.

 

Z Purlin Size that Made by Novotek Roll Forming Machine

Web: 120-300mm x Flange: 40-80 x Lip: 10-20mm (NTK-CZ-300A)

Web: 120-400 x Flange: 50-100 x Lip: 10-25mm (NTK-CZ-400A)

Other customized Z purlin roll forming machine also available.

Roof Z-purlin joints 

1. Z purlins are generally galvanized and installed on the high side along the longitudinal slope.

2. Z Purlins are connected to steel beams with ordinary C-class bolts through purlin support plates, purlin support plates and steel beams are welded into a whole in the factory and coated with corresponding primer and intermediate paint.

3. Z Purlins are connected to large and small heads to distinguish, deepening and processing should be consistent with the site construction sequence, and the size of the head is connected.

4. Z purlins can be reduced by increasing the number of perforations to facilitate on-site installation (wall purlins are the same).

Difference between C Purlin and Z Purlin

1, From the purlin shape: Z-type steel purlin and C-type steel purlin angle is not the same, which C-type product is 90 degrees, and Z-type product is less than 90 degrees, roughly 60 to 75 degrees. Therefore, if the roof of a certain slope needs to use purlins, then it is necessary to consider the angle of the purlin with its bearing force, and the Z Purlin can make full use of its bending performance.

2, If the purlin wants to be made into continuous members, it’s better to use Z purlin compared to the C purlin. Because the overlap of Z steel purlin is more convenient.

3, From the bending point: in the roof slope is small then metal Z purlin bending section modulus is slightly larger than C purlin. When the slope of the roof is large then the modulus utilization rate of Z purlin symmetrical in the vertical direction is very large, so Z purlin is more suitable for the roof with large slope;

4, The mechanical properties of the two purlins are very different: the Z-section can be connected by reliable lap joint, it can be calculated according to the continuous beam. Therefore, expect the door and window openings and other special node processing needs, Z-section purlin should be preferred. The wall purlin and the house purlin with low slope can use C Purlin. Shelving the house purlin with large slope should consider Z-shaped steel purlins, so that the resultant force of the roof load passes through the section center of the Z-shaped purlin.

  

Other Purlin Roll Forming Machines that NOVOTEK Made

• C Purlin Machine with Stacking Machine: Learn More

It includes a 5T hydraulic uncoiler, flattening machine, individual punch machine, main C purlin roll forming machine with fly cut, and automatic C purlin stacking machine. The machine's maximum speed could be up to 35-40m/min including hole punching. The purlin size could be customized, and the steel thickness could be up to 5mm. 

• Pre-Punch, Pre-Cut CZ Purlin Machine: Learn More

The Heavey Duty Fully Autoamtic NTK-CZ-350AQ Pre-cut CZ Purlin Roll Forming Machine adopts pre-cutting and pre-punching system which no need to adjust cutters as standard CZ purlin machine, and increase the machine operation a lot. By using a particular design, it can produce C Z U purlins up to 350mm and for maximum 3mm steel thickness. 

• Purlin Stacking Machine: Learn More

The C Z Purlin Stacking Machine is used to stack 100-300mm x 40-80mm C Z U profiles as pre-set quantity and layers. The machine could be customized according to customer's product size, and also can be equipped with your existing C Z purlin roll forming machine.

• Purlin/Tube Packing Machine: Learn More

The automatic C Z U Purlin and Steel Tube Packing Machine is designed to wrapping the steel products after stacked. Same as the above purlin stacking machine, the wrapping machine is also the subsequent auxiliary equipment of the NTK-CZ-300A Automatic CZ Purlin Machine.

Development History of NOVOTEK CZ Purlin Roll Forming Machine

1. Early Stage (1998-2005)

Initially, it is a single C shape purlin roll forming machine and a single size Z shape roll forming machine. The final product size adjustment is by spacers which needs a lot of operation time each time. They were focusing on small-scale production with low precision. Early machines primarily produced simple C and Z-shaped steel profiles, widely used in basic construction applications.

2. Semi-Automatic Advancement (2005-2010)

The first generation CZ interchangeable roll forming machine NTK-CZ-300 was first invented by NOVOTEK which both C channel and Z channel can be produced on one machine. The CZ profile interchange is by manually rotate some roller stations, and the purlin size adjustment is driven by electrical motor and operated through button. It is a significant movement of purlin roll forming industry and it increases the product capacity and efficacy a lot.

3. Fully Automatic Integration (2010-2015)

After continuous efforts, NOVOTEK first NTK-CZ-300A fully automatic CZ purlin roll forming machine is launched. It adopts PLC program to control the C & Z purlin interchange, as well as the size adjustment. This innovation increased the CZ purlin roll forming machine automation level and reduced the CZ machine operation time. Its automatic control program enabled precision control and the product quality and accuracy.

4. Smart and Information Factory (2015-now)

Modern purlin machines are equipped with advanced roll forming CSV file production control software and real-time monitoring capabilities. The incorporation of WIFI and big data analytics facilitates automated management and optimization of the C Z machine production process. Together high speed purlin fly cutting system, automatic CZ purlin stacking machineautomatic purlin wrapping machine, NOVOTEK now providing an entire solution for the smart C U Z purlin roll forming factory.

Novotek is aiming to improve various roll forming machine manufacturing capabilities including: U purlin, Sigma Profile, M Profile, Deck Sheet Roll Forming Machine, High Speed Roof Sheet Roll Forming Machine to meet customized production demands through advanced smart technologies.

Sự chỉ rõ

Video

Cuộc điều tra

Đặt hàng ngay bây giờ

Sản phẩm liên quan

Danh mục sản phẩm
Chào mừng bạn đến với Novotek Machinery
Cảm ơn bạn đã yêu cầu của bạn, bạn có thể mong đợi một câu trả lời trong 24 giờ.