Construction Mesh Welding Machine WMW-1200
The production line use for production for construction mesh panel
3.0-5.0mm wire. The whole line is composed of 4 parts, Wire Stand, line wire straighter, main welding machine and mesh cutting machine
1. Main Welding Machine
a) For this machine, the line wire feeding from coil automatically, which is more convenient and save the workers quantity
b) The transformer is our new model and with water cooling system, which makes the using life longer.
c) Our welding pressure adopts mechanical spring, which save the cost and Maintenance cost is lower than another pneumatic model.
d) The cross wire is feeding from pre-cut, which adopts step motor driven. And the cross wire will fall one by one.
e) In order to facilitate the management and control of the quota, set up the electronic counting of the net length of the numerical control device, can control the cutting machine to cut the net, for the length of the network management data is accurate and convenient.
f) Our control system adopts PLC, touch screen system which makes the operation more convenient.
One steel mesh welding controller is equipped with the transformer. The controller will connect with the touch screen, and we can set the welding current and welding time on the touch screen, which is very convenient.
2 Wire Stand & Line Wire Straighter
Especificação
Technical Parameters
|
Item |
Parameters |
|
Max Width of mesh |
1200mm |
|
Length |
No limit |
|
Welding points |
24 |
|
Wire diameter |
3.0-5.0mm |
|
Mesh Aperture |
50x50-200x200mm for 3.0-4.5mm 75x75-200x200mm for 3.0-5.0mm |
|
Wire material |
Carbon ≤0.2%, tensile strength≤550MP low carbon steel wire |
|
Speed |
60-80cross wires/min |
|
Transformer |
125KVA×3 |
|
Line wire feeding |
From coil automatically |
|
Cross wire feeding |
From pre-cut, step motor control |
|
Pressure |
Mechanical Spring |
|
Welding principle |
Silicon controlled synchronous controlled resistance welding |
|
Control system |
PLC control |
Vídeo
